View PE42823_9057447.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PE42823 document category: product specification ultracmos? spdt rf switch, 700 mhzC6 ghz ?2015 C 2017, peregrine semiconductor corporation. all rights re served. ? headquarters: 9380 carroll park drive, san diego, ca, 92121 product specification doc-67417-4 C (05/2017) www.psemi.com features ? excellent single-event peak power handling of 51 dbm lte ? exceptional linearity performance across all frequencies ? input ip3: 70 dbm ? input ip2: 105 dbm ? extended operating temperature of +105 c ? 1.8v/3.3v ttl compatible control ? high esd performance of 4.5 kv hbm on rf pins to ground ? packaging ? 16-lead 3 3 0.75 mm qfn applications ? 4g/4.5g wireless infrastructures ? pre-5g/5g massive mimo systems ? tdd-based rf transceivers product description the PE42823 is a harp? technology-enhanced 50 ? spdt rf protection switch designed for use in high power and high performance wireless infrastructure appli cations such as macrocells supporting frequencies up to 6 ghz. this switch features high linearity, which remains in variant across the full supply range. the PE42823 also features exceptional isolation, fast switching time and is offered in a 16-lead 3 3 0.75 mm qfn package. in addition, no external blocking capacitors are required if 0 vdc is present on the rf ports. the PE42823 is manufactured on peregrine?s ultracmos ? process, a patented advanced form of silicon-on- insulator (soi) technology. peregrine?s harp technology enhancements deliver high li nearity and excellent harmonics performance. it is an innovative feature of the ultracmos process, offe ring the performance of gaas with the economy and integration of conventional cmos. figure 1 ? PE42823 functional diagram ant (rfc) rx (rf2) tx (rf1) r ( (r ctrl v dd cmos control driver and esd
PE42823 spdt rf switch page 2 doc-67417-4 C (05/2017) www.psemi.com absolute maximum ratings exceeding absolute maximum ratings listed in table 1 may cause permanent damage. operation should be restricted to the limits in table 2 . operation between operating range maximum and absolute maximum for extended periods may reduce reliability. esd precautions when handling this ultracmos device, observe the same precautions as with any other esd-sensitive devices. although this device contains circuitry to protect it from damage due to esd, precautions should be taken to avoid exceeding the rating specified in table 1 . latch-up immunity unlike conventional cmos devices, ultracmos devices are immune to latch-up. table 1 ? absolute maximum ratings for PE42823 parameter condition min typ max unit power supply voltage ?0.3 5.5 v voltage on ctrl input ?0.3 3.6 v voltage on ls input ?0.3 3.6 v storage temperature range ?65 150 c input power, avg: 700 ?1800 mhz tx mode, 10-second duration, 8db par lte signal no power applied to off- terminated port. no hot switching. 43 dbm 1801?3800 mhz 42.5 dbm 3801?6000mhz 42 dbm esd voltage hbm: rf pins to gnd human body model (mil-std 883 method 3015). 4500 v all pins 4000 v esd voltage cdm, all pins charged device model (jedec jesd22-c101). 1250 v
doc-67417-4 C (05/2017) page 3 www.psemi.com PE42823 spdt rf switch recommended operating conditions table 2 lists the recommending operating conditions for t he PE42823. devices should not be operated outside the recommended operating conditions listed below. table 2 ? recommended operating conditions for PE42823 parameter min typ max unit power supply voltage 2.3 5.5 v power supply current 120 200 a control voltage high 1.17 3.6 v control voltage low ?0.3 0.6 v control current 10 a operating temperature range ?40 +25 +105 c
PE42823 spdt rf switch page 4 doc-67417-4 C (05/2017) www.psemi.com electrical specifications table 3 provides the PE42823 key electrical specifications @ +25 c, v dd = 2.3?5.5v, unless otherwise specified. table 3 ? PE42823 electrical specifications parameter path condition min typ max unit operational frequency 700 6000 mhz insertion loss ant?rx 700 mhz 2100 mhz 2700 mhz 3800 mhz 6000 mhz 0.39 0.51 0.55 0.68 1.28 0.50 0.60 0.70 0.85 1.80 db db db db db ant?tx 700 mhz 2100 mhz 2700 mhz 3800 mhz 6000 mhz 0.25 0.33 0.36 0.41 0.53 0.35 0.45 0.50 0.60 0.80 db db db db db isolation ant?rx 700 mhz 2100 mhz 2700 mhz 3800 mhz 6000 mhz 58 46 42 37 30 59 47 43 38 31 db db db db db ant?tx 700 mhz 2100 mhz 2700 mhz 3800 mhz 6000 mhz 47 36 33 28 22 48 37 34 29 23 db db db db db return loss ant?rx 700?2700 mhz 2701?3800 mhz 3800?6000 mhz 24 17 12 db db db ant?tx 700?2700 mhz 2701?3800 mhz 3800?6000 mhz 26 26 28 db db db input 1db compression ant?tx 700?3800 mhz 3801?6000 mhz 46 43 dbm dbm input ip3 ant?rx 70 dbm input ip2 ant?rx 105 dbm max r f input power tx mode continuous wave, ?40c to 105c 38.5 dbm rx mode continuous wave, ?40c to 105c 33 dbm settling time 50% ctrl to 0.05 db final value (?40c to +105c) rising edge 2 s settling time 50% ctrl to 0.05 db final value (?40c to +105c) falling edge 0.58 s switching time ant?rx 50% ctrl to 90% or 10% of final value 0.84 s ant?tx 50% ctrl to 90% or 10% of final value 0.62 s
doc-67417-4 C (05/2017) page 5 www.psemi.com PE42823 spdt rf switch control logic table 4 provides the control logic truth table for the PE42823. pin information this section provides pinout information for the PE42823. figure 2 shows the pin map of this device for the available package. table 5 provides a description for each pin. table 4 ? truth table for PE42823 ctrl ant?tx ant?rx 0o f fo n 1o no f f figure 2 ? pin configuration (top view) exposed ground pad gnd tx gnd gnd gnd gnd ant gnd gnd rx gnd gnd v dd nc ctrl gnd 1 3 2 4 12 10 11 9 5 7 6 8 16 14 15 13 pin 1 dot marking table 5 ? pin descriptions for PE42823 pin no. pin name description 1, 3, 4, 5, 6, 8, 9, 10, 12, 13 gnd ground. 2txtx rf port. 7 ant ant rf port. 11 rx rx rf port. 14 ctrl digital control logic input. 15 nc nc 16 v dd positive power supply voltage. note: * rf pins 2, 7 and 11 must be at 0 vdc. the rf pins do not require dc blocking capacitors for pro per operation if the 0 vdc require- ment is met.
PE42823 spdt rf switch page 6 doc-67417-4 C (05/2017) www.psemi.com figure 3 ? insertion loss vs temp (rf1) figure 4 ? insertion loss vs vdd (rf1) figure 5 ? insertion loss vs temp (rf2) -2 -1.8 -1.6 -1.4 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 inseron loss (db) frequency (ghz) -40oc +25oc +85oc +105oc -2 -1.8 -1.6 -1.4 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 inseron loss (db) frequency (ghz) 2.3v 3.3v 5.5v -2 -1.8 -1.6 -1.4 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 inseron loss (db) frequency (ghz) -40oc +25oc +85oc +105oc figure 6 ? insertion loss vs vdd (rf2) figure 7 ? rfc port return loss vs temp (rf1) figure 8 ? rfc port return loss vs temp (rf2) -2 -1.8 -1.6 -1.4 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 0.511.522.533.544.555.56 inseron loss (db) frequency (ghz) 2.3v 3.3v 5.5v -60 -50 -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 return loss (db) frequency (ghz) -40oc +25oc +85oc +105oc -60 -50 -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 re tu rn lo ss ( d b) frequency (ghz) -40oc +25oc +85oc +105oc
doc-67417-4 C (05/2017) page 7 www.psemi.com PE42823 spdt rf switch figure 9 ? isolation vs temp (rf1-rf2, rf1 active) figure 10 ? isolation vs temp (rf2-rf1, rf2 active) -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 isola on (db) frequency (ghz) -40oc +25oc +85oc +105oc -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 is ola o n ( db) frequency (ghz) -40oc +25oc +85oc +105oc figure 11 ? isolation vs temp (rfc-rf1, rf2 active) -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 iso la on (db) frequency (ghz) -40oc +25oc +85oc +105oc
PE42823 spdt rf switch page 8 doc-67417-4 C (05/2017) www.psemi.com evaluation board figure 12 ? evaluation kit layout for PE42823 prt-30188-02 r1 r2 r3 r7 c1 r5 c2 c3 r4 r6 c4 j4 dgnd vss/gnd vdd gnd ls u1 rfc thru j5 j6 j2 rf2 j1 3x3 16l qfn spdt rf1 j3
doc-67417-4 C (05/2017) page 9 www.psemi.com PE42823 spdt rf switch packaging information this section provides packaging data including the moisture sensitivity level, package drawing, package marking and tape-and-reel information. moisture sensitivity level the moisture sensitivity level rating for the PE42823 in the 16-lead 3 3 0.75 mm qfn package is msl1. package drawing top-marking specification figure 13 ? package mechanical drawing for 16-lead 3 3 0.75 mm qfn figure 14 ? package marking specifications for PE42823 top view bottom view side view recommended land pattern a 0.10 c (2x) c 0.10 c 0.05 c seating plane b 0.10 c (2x) 0.10 c a b 0.05 c all features pin #1 corner 3.00 3.00 0.250.05 (x16) 0.50 1.800.05 1.800.05 0.350.05 (x16) 1.50 ref 0.750.05 0.05 ref 0.203 ref (x12) 0.30 (x16) 0.55 (x16) 3.40 3.40 0.50 (x12) 1.85 1.85 1 4 5 8 9 12 13 16 = yy = ww = zzzzzz = pin 1 indicator last two digits of assembly year assembly work week assembly lot code (maximum six characters) 42823 yyww zzzzzz
PE42823 spdt rf switch page 10 doc-67417-4 C (05/2017) www.psemi.com tape and reel specification figure 15 ? tape and reel specifications for 16-lead 3 3 0.75 mm qfn t k0 a0 b0 p0 p1 d1 a section a-a a direction of feed d0 e w0 p2 see note 3 see note 1 f see note 3 a0 b0 k0 d0 d1 e f p0 p1 p2 t w0 3.30 3.30 1.10 1.50 + 0.1/ -0.0 1.5 min 1.75 0.10 5.50 0.05 4.00 8.00 2.00 0.05 0.30 0.05 12.00 0.3 device orientation in tape pin 1 notes: 1. 10 sprocket hole pitch cumulative tolerance 0.2 2. camber in compliance with eia 481 3. pocket position relative to sprocket hole measured as true position of pocket, not pocket hole
PE42823 spdt rf switch product specification www.psemi.com doc-67417-4 C (05/2017) document categories advance information the product is in a formative or design st age. the datasheet contains design target specifications for pr oduct development. spe cifications and features may change in any manner without notice. preliminary specification the datasheet contains preliminary data. additional data may be added at a later date. peregrine reserves the right to change s pecifications at any time without notice in order to supply the best possible product. product specification the datasheet contains final data. in the event peregrine decides to c hange the specifications, peregrine will notify customers of the intended changes by issuing a cnf (c ustomer notification form). sales contact for additional information, cont act sales at sales@psemi.com. disclaimers the information in this document is believed to be reliable. ho wever, peregrine assumes no liability for the use of this inform ation. use shall be entirely at the user?s own risk. no patent rights or licenses to any ci rcuits described in this document are implied or granted to any third party. peregrine?s products are not designed or intended for use in devi ces or systems intended for surg ical implant, or in other appl ications intended to support or sustain life, or in any application in which the fa ilure of the peregrine product could create a situation in which personal injury or death might occur. peregrine assumes no liability for damages, includin g consequential or incidental damages, arising out of the use of its products in such applications. patent statement peregrine products are protected under one or more of the following u.s. patents: patents.psemi.com copyright and trademark ?2015 ? 2017, peregrine semiconductor corporation. all rights rese rved. the peregrine name, logo, utsi and ultracmos are regist ered trade- marks and harp, multiswitch and dune are tr ademarks of peregrine semiconductor corp. ordering information table 6 lists the available ordering codes for the PE42823 as well as available shipping methods. table 6 ? order codes for PE42823 order codes description packaging shipping method PE42823a?x PE42823 spdt rf switch 16-lead 3 3 0.75 mm qfn 500 units/t&r ek42823?01 PE42823 evaluation kit evaluation kit 1/box

▲Up To Search▲

Price & Availability of PE42823

	To Download PE42823 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .